We suggest a fiber micro-knot fabricated on a long-period fiber grating. The long-period fiber grating excites high-order modes into the micro-knot and transfers the output back to the Gaussian mode. We show theoretically and experimentally that these micro-knots have an improved Q-factor, higher stability, and have an increased evanescence wave coupling to the environment than single mode fibe...

With diameter close to the wavelength of the guided light and high index contrast between the fiber and the surrounding, an optical micro-fiber shows a variety of interesting waveguiding properties, including widely tailorable optical confinement, strong evanescent fields and waveguide dispersion. Among various micro-fiber applications, optical sensing has been attracting increasing research in...

In this article, a novel structure of photonic crystal fiber with nearly zero ultra-flattened chromatic dispersion and ultra-low confinement loss is presented. By replacing the circular air-holes of two first rings with the elliptical air-holes, a fiber with outstanding features of chromatic dispersion and confinement loss is designed. The proposed structure is optimized for operating in a wide...

For a fiber optical surface plasmon resonance (SPR) sensor a short part of its cladding should be removed to coat a thin layer of a metal. Usually this is problematic when an optical fiber with small core diameter is used. In this paper, a new method using µliter droplet of the HF acid for short fiber optical taper fabrication is reported. Using this method in a multi-mode optical fiber w...

Micro-channels were fabricated in hollow-core photonic bandgap fiber (HC-PBGF) and suspended-core holey fiber (SC-HF) by femtosecond Ti:sapphire laser irradiation. Gaseous access was demonstrated via these engineered ports to the core of HC-PBGF and the hollow cladding of SC-HF. Femtosecond laser micro-machining caused no additional transmission loss in HC-PBGFs. This allowed a novel gas cell t...

Recent developments in fiber-optic sensing have involved booming research in the design and manufacturing of novel micro-structured optical fiber devices. From the conventional tapered fiber architectures to the novel micro-machined devices by advanced laser systems, thousands of micro-structured fiber-optic sensors have been proposed and fabricated for applications in measuring temperature, st...

A low cost fiber-optic micro-cavity interferometric sensor is presented. The micro-cavity is fabricated at the fiber tip by splicing a silica capillary to a single mode fiber and then heating/melting the capillary to form a microsphere with an internal air cavity. Applications of the micro-cavity sensor for temperature and traverse load measurements are demonstrated. The sensor has small size a...

Integration of micro-optical elements (MOEs) with optical fiber at top-end was realized by use of focused ion beam (FIB) direct milling. The designed MOEs (micro-refractive lens, microdiffractive lens with continuous relief, and micro-gratings) were directly milled by the FIB with ion energy and ion beam current of 40 keV and 569 pA, respectively, in the core area of both single mode fiber and ...

A new method to fabricate an integrated optical fiber micro-sphere with a diameter within 100 µm, based on the optical fiber tapering technique and the Taguchi method is proposed. Using a 125 µm diameter single-mode (SM) optical fiber, an optical fiber taper with a cone angle is formed with the tapering technique, and the fabrication optimization of a micro-sphere with a diameter of less than 1...

Background: Vestibular Schwannoma (VS) is one of the skull base tumors originating from vestibular portion of eighth cranial nerve. Recently, 2 micro-Thulium laser is used in the surgery of some intracranial tumors. Objectives: Assessing the efficacy of 2 micro-Thulium flexible hand-held laser fiber (RevolixjrÒ) in microsurgical removal of VS. Materials and Methods: This retrospect...